词语:压板热度:372

词语压板拆分为汉字:

压字的拼音、笔画、偏旁部首、笔顺、繁体字,压字字源来历,压字演变

1. 压 [yā]2. 压 [yà]压 [yā]从上面加力:~住。~碎。~缩。泰山~顶。用威力制服、镇服:镇~。~服。~迫。控制,使稳定,使平静:~价。~住阵脚。搁置:积~。逼近:大兵~境。赌博时在某一门上下注:~宝(亦作“押宝”)。压 [……

板字的拼音、笔画、偏旁部首、笔顺、繁体字,板字字源来历,板字演变

成片的较硬的物体:案~。~子。木~。~上钉钉。诏书:诏~。演奏民族音乐或戏曲时打节拍的乐器,又指歌唱的节奏:檀~。鼓~。一字一~。荒腔走~。不灵活,少变化:死~。呆~。硬得像板子似的:~结。见“老”字“老板”。……

 

查询词语:压板

汉语拼音:yà bǎn

词语压板基本解释

跷跷板(qiāoqiāobǎn)。

词语压板详细解释

  1. 一种中间有支撑,两端坐人可以彼此上下起落的儿童体育活动器械。又叫翘翘板儿。

词语压板在线造句

  1. the top of the plastic hat is provided with a ball-shaped concave position, where a press plate and a forcing screw are installed in.

    塑制帽的顶部塑有球形凹进处、并可安装压板和压紧螺钉。

  2. The grid normally consists of a back: plate (clamp plate) on to which is mounted a number of conveniently shaped 'support blocks'.

    这个格架通常由底板(压板)组成,上面安装了几块形状适宜的支撑块。

  3. The top bar is the "Protection linking piece [Soft], Protection linking piece [Hard]" changeover bar (the color of the bar is always grey).

    第一个是“保护压板[软]、保护压板[硬]”切换条(颜色始终为灰色)。

  4. At least two layers of polymer film separated by frame-type bulkheads between two press plates can form a basic unit.

    在两块压板之间由两种框式隔板依次相互间隔开的聚合膜至少两层即可构成基本单元装置。

  5. Pulling flats are fixed in place by inner and outer end plates. A compression fitting secures at least the outer end plate to the roll.

    多个牵引压板,所述多个牵引压板基本上由不粉化的材料构成并且夹在外端板和内端板之间;

  6. A modern Cuban sandwich is always toasted in a sandwich press until the cheese melts.

    现代古巴三明治一定要在三明治压板上烤到奶酪融化为止。

  7. Platen: Small letterpress printing machine on which the paper is held in the platen and pressed up against the vertically-held type-bed.

    平压机:小型活版印刷机。纸张摆稳于压板上,然后压向垂直的装版台的机器。

  8. aerospace series . carbon fibre reinforced plastics . unidirectional laminates . determination of the apparent interlaminar shear strength.

    航天航空系列。碳纤维增强塑料。单向层压板。表观层间剪切强度的测定。

  9. A clamshell or other hinged top cover type carton for hamburgers is provided with a divider sheet formed from *board or a *board laminate.

    翻盖铰链或其他顶盖的汉堡包型纸箱纸板提供了从形成分隔表或纸板层压板。

词语压板百科解释:

压板

压板是通过在经过含有烷氧基硅烷衍生物和/或其缩合物的溶液浸渍处理得到的底材上,浸渍不含卤系阻燃剂的热固化性树脂,加热干燥得到预浸料坯,将此预浸料坯数片重叠,根据需要在其单侧或双侧叠放铜箔,加热加压层叠制得。